TYM-TS25

$26,500 $27,000

25hp hydrostatic transmission compact tractor.

Powered by 25hp Tier 4 Yanmar 3 cylinder water-cooled Diesel engine for optimum performance

  • Yanmar is a global engine manufacturer of quality, giving you the confidence in relaibility and after-sales support
  • Engine certified to meet the stringent Tier 4 engine and noise emission standards
  • A generous engine capacity of 1267cc , resulting in 60Nm torque for serious work
  • For added safety when starting the engine the driver must be seated, the brake pedal depressed and the PTO switched off
  • The tractor weight of 730kg is a reflection of the heavy duty transmission, driveline and axles. The tractor weight is in part, a result of the heavy front axle, which is important for a tractor fitted with a front end loader as substantial loads are applied during loader operation
  • The high efficiency Hydrostatic transmission gives infinitely variable drive speed in the
  • forward and reverse direction
  • The Hydrostatic drive controlled byIndependent Forward and Reverse pedals for easy simple operation.
  • Hydrostatic power steering lightens steering especially important with front end loaders
  • Easy lever setting of Cruise control for tireless driving when mowing
  • Industrial front and rear tyres are forgiving on lawn areas yet still maintain traction where required and are ideal for front-end loader applications
  • 20x8-10 Front Tyers with 5 studs for greater strength
  • 27x12.50 Rear Tyres with 6 studs for greater strength
  • The heavy duty front axle performs in tough working conditions and handles loads with ease
  • A long wheel base and wide stance increases stability in all conditions
  • 4WD and the Diff Lock provides better traction, control and performance
  • 4WD mode is controlled by a lever on the left hand side of the operator
  • Quick response and durable wet disc brake
  • Ergonically designed foot brake located on LHS of the floor
  • Easy selection of Mid/Rear PTO which can be operated either independently or simultaneously
  • Fully independant rear PTO(540rpm) & mid PTO(2000rpm) activated by electro-hydraulic clutch
  • PTO engagement is easily operated by push button control on the dash
  • The rear linkage is Category 1 with a large lift capacity of 600kg (at ball ends)
  • Flat Tow Bar for towing of trailers
  • The PTO drive is a smiple and direct design for high efficiency and power
  • The PTO clutch is and independant oil immersed clutch pack for long life and simple push button operation
  • Hydraulic 3 point linkage lowering speed control
  • The ergonomic design has the controls within easy reach of the operator
  • The modern instrument panel is easy to read and displays all the essential information
  • Right Hand Side controls
  • 3 point linkage lever
  • Left Hand Side Controls
  • 4WD
  • PTO
  • High-Low transmission range lever
  • Clean uncluttered access provides generous room for access on and off the tractor
  • For the operation of log splitters or TYM TX25 Backhoe
  • 2 post folding ROPS for working under trees or low clearance areas
  • One-touch opening hood allows complete access for daily service checks and maintenance
  • Side panels are easily removed without the need of special tools
  • Large cannister type air cleaner for dusty Australian conditions
  • TX25 LEVEL LIFT LOADER
  • Quick detach from tractor and quick detach bucket
  • Fast Cycle times (Raise/Lower)
  • Inbuilt loader parking stands for safety when servicing
  • Counter Ballast Box aids stability when lifting heavy loads
  • Full width adjustable bump guard for tractor bonnet protection
  • Heavy duty 4 in 1 bucket
  • Single Joystick delivers ergonomic operation of front end loader
  • MM60 MID MOUNT MOWER
  • Side Discharge with rubber guide
  • 5mm Fabricated Heavy duty deck
  • Powerful and clean cutting
  • Automatic belt tensioner
  • Possible to operate 3 point linkage
  • SPECIFICATIONSTS25 HSTEngine Type (Model 3TNV80F-SDSA)YanmarNumber of Cylinders3Engine Power (hp/kW)25/18.4Transmission TypeHydrostaticForward / Reverse Shuttle TypeHSTNumber Speed Ranges2Maximum Speed (km/h)18.1PTO Speeds (rpm)540Mid PTO
  • Independent Push Button PTO engagement (Electro-Hydraulic)3-point Linkage Lift Capacity (kg)600Number of Hydraulic RemotesOptionalIntegrated Joystick Control for Front-end LoaderWeight - Tractor Only (kg)730

    Click here for the best price